R211x-HP Flexfabric 11900 TRILL Command Reference

38
trill link-type
Use trill link-type to configure the link type of a TRILL port.
Use undo trill link-type to restore the default.
Syntax
trill link-type { access [ alone ] | hybrid | trunk }
undo trill link-type
Default
The link type of a TRILL port is access without the alone attribute.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Parameters
access [ alone ] : Configures the link type as access. When the alone keyword is not specified, the port
is configured as an access port without the alone attribute, and the port can process only local data
frames and Hello frames. When the alone keyword is specified, the port is configured as an access port
with the alone attribute, and the port does not send or receive Hello frames and does not participate in
the DRB election or AVF negotiation.
hybrid: Configures the link type as hybrid. A hybrid port combines the attributes of an access port and
a trunk port, and it can process local data frames and passing data frames.
trunk: Configures the link type as trunk. A trunk port can process passing data frames and some of Layer
2 protocol packets (for example, LLDP packets), and it cannot process local data frames.
Usage guidelines
Configuration in Layer 2 Ethernet interface view takes effect on only the current port. Configuration in
Layer 2 aggregate interface view takes effect on the current interface and its member ports.
Configuration on the member port of an aggregate interface takes effect after the member port leaves the
aggregation group.
Examples
# Configure the link type of TRILL port Ten-GigabitEthernet 1/0/1 as trunk.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] trill link-type trunk
trill timer avf-inhibited
Use trill timer avf-inhibited to configure the inhibition time.
Use undo trill timer avf-inhibited to restore the default.
Syntax
trill timer avf-inhibited time