R211x-HP Flexfabric 11900 TRILL Command Reference

33
Syntax
trill
undo trill
Default
TRILL is disabled globally.
Views
System view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable TRILL globally and enter TRILL view.
<Sysname> system-view
[Sysname] trill
[Sysname-trill]
trill announcing-vlan
Use trill announcing-vlan to configure the announcing VLANs.
Use undo trill announcing-vlan to restore the default.
Syntax
trill announcing-vlan { vlan-list | null }
undo trill announcing-vlan { vlan-list | null }
Defaults
No announcing VLAN is configured. The announcing VLANs are the enabled VLANs.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Parameters
vlan-list: Specifies the announcing VLAN list that includes multiple announcing VLANs. The VLAN list is
represented in the form of vlan-list = { vlan-id [ to vlan-id ] }&<1-10>, where vlan-id specifies a VLAN ID
in the range of 1 to 4094 and &<1-10> indicates that you can specify up to ten { vlan-id [ to vlan-id ] }
parameters.
null: Specifies that the announcing VLAN list does not include any VLANs.
Usage guidelines
Announcing VLANs forward Hello frames between RBs. The DRB uses the VLANs in the following set for
sending Hello frames: enabled VLANs ∩ (announcing VLANs ∪ designated VLAN). A non-DRB uses the