R211x-HP Flexfabric 11900 TRILL Command Reference

Usage guidelines

TRILL uses the IS-IS MIB to provide the TRILL object management function for NMS. Because the MIB

objects defined in the IS-IS MIB are single-instance management objects, NMS cannot manage IS-IS and

TRILL at the same time. According to the management for multiple OSPF instances defined in RFC 4750,

you can set a context name for the SNMP object for managing TRILL. In this way, the SNMP requests for

managing IS-IS and the SNMP requests for managing TRILL from NMS can be distinguished. Because the

context name is a concept specific to SNMPv3, the community names are mapped to context names for

distinguishing different protocols in SNMPv1/v2c.

Examples

# Configure the context name as trill for the SNMP object for managing TRILL.

<Sysname> system-view

[Sysname] trill

[Sysname-trill] snmp context-name trill

snmp-agent trap enable trill

Use snmp-agent trap enable trill to enable SNMP notification sending for TRILL.

Use undo snmp-agent trap enable trill to disable SNMP notification sending for TRILL.

Syntax

snmp-agent trap enable trill [ adjacency-state-change | area-mismatch | buffsize-mismatch |

id-length-mismatch | lsdboverload-state-change | lsp-parse-error | lsp-size-exceeded |

rejected-adjacency | skip-sequence-number | topology-change | version-skew ] *

undo snmp-agent trap enable trill [ adjacency-state-change | area-mismatch | buffsize-mismatch |

id-length-mismatch | lsdboverload-state-change | lsp-parse-error | lsp-size-exceeded |

rejected-adjacency | skip-sequence-number | topology-change | version-skew ] *

Default

The trapping function is enabled for TRILL.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

adjacency-state-change: Specifies notifications about TRILL adjacency state changes.

area-mismatch: Specifies notifications about mismatches in area addresses between Hello packets.

buffsize-mismatch: Specifies notifications about buffer size mismatches for LSPs.

id-length-mismatch: Specifies notifications about mismatches in system ID lengths of TRILL frames.

lsdboverload-state-change: Specifies notifications about LSDB overload state changes.

lsp-parse-error: Specifies notifications about LSP packet parse errors.