R211x-HP Flexfabric 11900 TRILL Command Reference

24
Predefined user roles
network-admin
mdc-admin
Parameters
nickname: Specifies the nickname for an RB. A nickname is a hexadecimal number in the range of 0x1
to 0xFFBF.
priority: Specifies the priority for an RB to hold a nickname. The value range for the priority is 129 to 255,
and the default priority is 192.
Usage guidelines
The nickname of an RB is the address of the RB in the TRILL network.
When multiple RBs in the TRILL network hold the same nickname, the RB with the highest priority uses the
nickname.
When RBs have the same priority, the RB with the highest system ID uses the nickname. The system
automatically assigns new nicknames to the other RBs.
Examples
# Set the nickname to 0x0001 for the RB, and set the priority for the RB to hold the nickname to 198.
<Sysname> system-view
[Sysname] trill
[Sysname-trill] nickname 0001 priority 198
reset trill
Use reset trill to clear dynamic running statistics of the TRILL process.
Syntax
reset trill
Views
User view
Predefined user roles
network-admin
mdc-admin
Examples
# Clear dynamic running statistics of the TRILL process.
<Sysname> reset trill
set-overload
Use set-overload to set the Overload bit of LSPs and set the lifetime of the set Overload bit.
Use undo set-overload to clear the Overload bit.
Syntax
set-overload [ timeout ]