R211x-HP Flexfabric 11900 TRILL Command Reference

21
Syntax
lsp-length originate size
undo lsp-length originate
Defaults
The maximum length of an LSP originated by an RB is 1458 bytes.
Views
TRILL view
Predefined user roles
network-admin
mdc-admin
Parameters
size: Specifies the maximum length of an LSP originated by an RB. The value range for this argument is
512 to 16384 bytes.
Usage guidelines
The maximum length of an LSP originated by an RB cannot be greater than the maximum length of an LSP
that can be received by an RB. Otherwise, the system displays error messages.
The actual maximum LSP length is determined by the smallest one of the configured value, the interface
MTU, and the maximum length of an LSP originated by an RB (which is carried in LSPs).
Examples
# Set the maximum length of an LSP originated by an RB to 1024 bytes.
<Sysname> system-view
[Sysname] trill
[Sysname-trill] lsp-length originate 1024
Related commands
lsp-length receive
lsp-length receive
Use lsp-length receive to set the maximum length of an LSP that can be received by an RB.
Use undo lsp-length receive to restore the default.
Syntax
lsp-length receive size
undo lsp-length receive
Defaults
The maximum length of an LSP that can be received by an RB is 1492 bytes.
Views
TRILL view
Predefined user roles
network-admin