R211x-HP Flexfabric 11900 TRILL Command Reference

20
Views
TRILL view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies the GR restart interval for TRILL, in the range of 30 to 1800 seconds.
Examples
# Configure the restart interval as 120 seconds for TRILL.
<Sysname> system-view
[Sysname] trill
[Sysname-trill] graceful-restart interval 120
log-peer-change enable
Use log-peer-change enable to enable logging of TRILL neighbor changes.
Use undo log-peer-change enable to disable logging of TRILL neighbor changes.
Syntax
log-peer-change enable
undo log-peer-change enable
Default
Logging of TRILL neighbor changes is enabled.
Views
TRILL view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command outputs logs of TRILL neighbor changes to the configuration terminal.
Examples
# Disable logging of TRILL neighbor changes.
<Sysname> system-view
[Sysname] trill
[Sysname-trill] undo log-peer-change enable
lsp-length originate
Use lsp-length originate to set the maximum length of an LSP originated by an RB.
Use undo lsp-length originate to restore the default.