R211x-HP Flexfabric 11900 TRILL Command Reference

18
Table 12 Command output
Field Descri
p
tion
Ingress-nickname Nickname of the ingress RB.
Expected-rcv-ports Expected incoming port.
display trill unicast-route
Use display trill unicast-route to display the TRILL unicast routing table.
Syntax
display trill unicast-route [ nickname nickname ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
nickname nickname: Displays information about the RB specified by its nickname. The nickname is a
hexadecimal number in the range of 0x1 to 0xFFBF. If no RB is specified, the command displays
information about all RBs.
verbose: Displays detailed information. If this keyword is not specified, the command displays brief
information.
Examples
# Display brief information about all entries in the TRILL unicast routing table.
<Sysname> display trill unicast-route
Destination Interface NextHop
-----------------------------------------------
0xfa1b N/A N/A
0x899b XGE1/0/1 Direct
# Display detailed information about all entries in the TRILL unicast routing table.
<Sysname> display trill unicast-route verbose
Destination: 0xfa1b
NextHop count: 0 Neighbor ID: 0x0000
Destination: 0x899b
NextHop count: 1 Neighbor ID: 0x0101
Interface: XGE1/0/1 NextHop: Direct