R211x-HP Flexfabric 11900 TRILL Command Reference

Field Descri

tion

InNickName Nickname of the ingress RB of the entry.

VLAN ID VLAN ID of the entry.

MAC address MAC address of the entry.

Flag

Entry type:

• Egress—Egress entries.

• Transit—Transit entries.

• Egress/Transit—Both transit and egress entries.

Port/Ports Ports of the entry.

display trill multicast-route

Use display trill multicast-route to display the TRILL multicast routing table information, which includes the

next-hop outgoing port list for multicast frames, broadcast frames, and unknown unicast frames based on

the multicast distribution trees.

Syntax

display trill multicast-route [ tree-root nickname [ vlan vlan-list [ mac-address mac-address ] ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

tree-root nickname: Displays the TRILL multicast routing table information for the TRILL distribution tree

rooted at the specified RB. The nickname argument is a hexadecimal number in the range of 0x0 to

0xFFFF. If this option is not specified, the command displays information about the TRILL multicast routing

table.

vlan vlan-list: Displays the information within the specified VLAN. The vlan-list argument specifies

multiple VLANs in the form of { vlan-id [ to vlan-id ] }&<1-10>, where vlan-id is a VLAN ID in the range

of 1 to 4094 and &<1-10> indicates that you can specify up to ten vlan-id [ to vlan-id parameters. If no

VLAN is specified, the command displays information about all VLANs.

mac-address mac-address: Displays information about a specified MAC address. If no MAC address is

specified, the command displays information about all MAC addresses.

Examples

# Display all information about the TRILL multicast routing table.

<Sysname> display trill multicast-route

Root Flag

-------------------------------------

0x899b Valid