R211x-HP Flexfabric 11900 TRILL Command Reference

6
Field Descri
p
tion
Restart phase
Restart phase:
• Finish—GR is complete.
• LSDB synchronization—T2 synchronization phase.
• LSDB generation—LSP generation phase.
• MCS synchronization—Layer 2 multicast data synchronization phase.
• SPF—Route calculation phase.
Restart interval Restart interval (in seconds).
T3 remaining time
Remaining time of the T3 timer (in seconds). The initial value is 65535 seconds,
and is updated according to the remaining time in the RA packet.
Total number of interfaces Total number of interfaces in the process.
T2 remaining time
Remaining time of the T2 timer (in seconds). The initial value of the field is fixed
at 60 seconds for GR of the Restart type and is the value (300 seconds by
default) set by using the graceful-restart interval command for GR of the Start
type.
Interface Port name.
T1 remaining time
Remaining time of the T1 timer (in seconds). The initial value of the field is 3
seconds.
RA received
RA received flag bit:
• Y—Set.
• N—Not set.
CSNP received
CSNP received flag bit:
• Y—Set.
• N—Not set.
T1 expiration number Number of T1 timer expirations. The maximum value of the field is 10.
display trill interface
Use display trill interface to display TRILL information about an interface.
Syntax
display trill interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
the command displays TRILL information about all interfaces.