R211x-HP Flexfabric 11900 MPLS Command Reference

84
Summary Refresh: Disabled Reliability: Disabled
Retransmit interval: 500 ms Retransmit increment: 1
Authentication: Enabled
Lifetime: 300 sec
Window size: 64
Challenge: Enabled
Bypass tunnels: None
Table 25 Command output
Field Descri
p
tion
Logical interface handle
Logical interface handle, used to distinguish logical outgoing interfaces on
the RSVP interface.
State Interface state recorded by RSVP: UP or Down.
IP address IP address of the current interface used by RSVP.
MPLS TE MPLS TE state on the interface.
RSVP RSVP state on the interface.
Hello State of the hello extension function on the interface.
BFD BFD state on the interface.
Summary Refresh State of the summary refresh function on the interface.
Reliability State of the reliable RSVP message delivery function on the interface.
Retransmit interval
Initial retransmission interval for reliable RSVP message delivery, in
milliseconds.
Retransmit increment Retransmission increment value for reliable RSVP message delivery.
Authentication RSVP authentication state on the interface.
Lifetime Idle timeout for RSVP security associations, in seconds.
Window size
Maximum number of out-of-sequence authenticated RSVP messages that
can be received.
Challenge State of the challenge-response handshake function on the interface.
Bypass tunnels
Bypass tunnels configured on the interface for fast reroute (FRR). If no
bypass tunnels are configured, this field displays None. This field is not
supported in the current software version and is reserved for future
support.
display rsvp authentication
Use display rsvp authentication to display information about the security associations established with
RSVP neighbors.
Syntax
display rsvp authentication [ from ip-address ] [ to ip-address ] [ verbose ]
Views
Any view