R211x-HP Flexfabric 11900 MPLS Command Reference

83
PSB number: 5 RSB number: 5
LSP number: 5 Request number: 5
Peer number: 5 SA number: 5
Table 24 Command output
Field Descri
p
tion
Fast Reroute time
Interval for detecting whether a better bypass CRLSP is available for a
primary CRLSP, in seconds. This field is not supported in the current
software version and is reserved for future support.
Refresh interval Interval for refreshing Path and Resv messages, in seconds.
Keep multiplier PSB and RSB timeout multiplier.
Hello interval Interval for sending hello requests, in seconds.
Hello lost Maximum number of consecutive lost or erroneous hellos allowed.
Authentication RSVP authentication state.
Lifetime Idle timeout for RSVP security associations, in seconds.
Window size
Maximum number of out-of-sequence authenticated RSVP messages that
can be received.
Challenge State of the challenge-response handshake function.
Statistics RSVP statistics.
PSB number Total number of PSBs.
RSB number Total number of RSBs.
LSP number Total number of LSPs established by RSVP.
Request number Total number of RSVP request data blocks.
Peer number Total number of RSVP neighbors.
SA number Total number of security associations.
# Display the RSVP information for all interfaces.
<Sysname> display rsvp interface
Interface: Vlan10 Logical interface handle: 0x19a5
State: Up IP address: 50.1.0.1
MPLS TE: Enabled RSVP: Enabled
Hello: Enabled BFD: Enabled
Summary Refresh: Enabled Reliability: Disabled
Retransmit interval: 500 ms Retransmit increment: 1
Authentication: Enabled
Lifetime: 300 sec
Window size: 64
Challenge: Enabled
Bypass tunnels: None
Interface: Vlan11 Logical interface handle: 0x19a6
State: Up IP address: 50.2.0.1
MPLS TE: Enabled RSVP: Enabled
Hello: Enabled BFD: Enabled