R211x-HP Flexfabric 11900 MPLS Command Reference

73
Predefined user roles
network-admin
mdc-admin
Parameters
lsp-name: Specifies a name for the static CRLSP, a case-sensitive string of 1 to 15 characters.
in-label in-label-value: Specifies an incoming label in the range of 16 to 1023.
Examples
# On the egress node, configure a static CRLSP with the name static-te-1 and incoming label 233.
<Sysname> system-view
[Sysname] static-cr-lsp egress static-te-1 in-label 233
Related commands
• display mpls static-cr-lsp
• static-cr-lsp ingress
• static-cr-lsp transit
static-cr-lsp ingress
Use static-cr-lsp ingress to configure the ingress node of a static CRLSP.
Use undo static-cr-lsp ingress to delete the ingress node configuration of the static CRLSP.
Syntax
static-cr-lsp ingress lsp-name { nexthop next-hop-addr | outgoing-interface interface-type
interface-number } out-label out-label-value
undo static-cr-lsp ingress lsp-name
Default
No static CRLSP exists on the device.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
lsp-name: Specifies a name for the static CRLSP, a case-sensitive string of 1 to 15 characters.
nexthop next-hop-addr: Specifies the nexthop IP address.
outgoing-interface interface-type interface-number: Specifies an outgoing interface by its type and
number. The switch only supports specifying a tunnel interface as an outgoing interface.
out-label out-label-value: Specifies an outgoing label, a value of 0, 3, or in the range of 16 to 1023.
Usage guidelines
The nexthop address specified for the static CRLSP cannot be a public IP address on the local device.