R211x-HP Flexfabric 11900 MPLS Command Reference

72
LSR Type : Ingress
In-Label : Null
Out-Label : 60
Out-Interface : Vlan10
Nexthop : 20.1.1.2
Class Type : -
Bandwidth : 0 kbps
LSP State : Up
Table 23 Command output
Field Descri
p
tion
LSP Name Name of the static CRLSP.
LSR Type
LSR type of the local node on the static CRLSP: Ingress, Transit, or
Egress.
In-Label Incoming label.
Out-Label Outgoing label.
Out-Interface Outgoing interface.
Nexthop Next hop address.
Class Type
Class type of the static CRLSP. This field is not supported in the current
software version and is reserved for future support.
Bandwidth Bandwidth required by the static CRLSP, in kbps.
LSP State
Current state of the static CRLSP:
• Down—The CRLSP is not available.
• Up—The CRLSP is available.
Related commands
• static-cr-lsp egress
• static-cr-lsp ingress
• static-cr-lsp transit
static-cr-lsp egress
Use static-cr-lsp egress to configure the egress node of a static CRLSP.
Use undo static-cr-lsp egress to delete the egress node configuration of the static CRLSP.
Syntax
static-cr-lsp egress lsp-name in-label in-label-value
undo static-cr-lsp egress lsp-name
Default
No static CRLSP exists on the device.
Views
System view