R211x-HP Flexfabric 11900 MPLS Command Reference

35
Table 17 Command output
Field Descri
p
tion
Global Parameters Global parameters for all LDP-enabled networks.
Protocol Version LDP protocol version.
Nonstop Routing
Whether the nonstop routing function is enabled. This field is not
supported in the current software version and is reserved for future
support.
Graceful Restart
Whether the GR function is enabled.
• On—Enabled.
• Off—Disabled.
Reconnect Time Value of the Reconnect timer, in seconds.
Forwarding State Hold Time Value of the MPLS Forwarding State Holding timer, in seconds.
Instance Parameters Running parameters for a specific VPN instance or public network.
Instance ID VPN instance ID. For the public network, this field displays 0.
Instance State LDP status in the VPN instance, Active or Inactive.
LSR ID LSR ID of the local device.
Loop Detection
Whether loop detection is enabled.
• On—Enabled.
• Off—Disabled.
Hop Count Limit Hop count limit specified for loop detection.
Path Vector Limit Path Vector length limit specified for loop detection.
Label Retention Mode The device supports only the Liberal mode.
IGP Sync Delay
Delay time (in seconds) that LDP must wait before it notifies IGP of an
LDP session-up event. This field is not supported in the current software
version and is reserved for future support.
IGP Sync Delay on Restart
Delay time (in seconds) that LDP must wait before it notifies IGP of an
LDP session-up event in case of LDP restart. This field is not supported
in the current software version and is reserved for future support.
display mpls ldp peer
Use display mpls ldp peer to display LDP peer and session information.
Syntax
display mpls ldp peer [ vpn-instance vpn-instance-name ] [ peer-lsr-id ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin