R211x-HP Flexfabric 11900 MPLS Command Reference

34
Field Descri
p
tion
In/Out Label Incoming/outgoing label.
Nexthop Next hop address for the FEC.
OutInterface Outgoing interface for the FEC.
Related commands
display mpls lsp
display mpls ldp parameter
Use display mpls ldp parameter to display LDP running parameters.
Syntax
display mpls ldp parameter [ vpn-instance vpn-instance-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. The command displays the LDP running parameters for the specified VPN. If you
do not specify a VPN instance, the command displays the LDP running parameters for the public
network.
Examples
# Display LDP running parameters for the public network.
<Sysname> display mpls ldp parameter
Global Parameters:
Protocol Version : V1
Nonstop Routing : Off Graceful Restart : Off
Reconnect Time : 120 sec Forwarding State Hold Time: 360 sec
Instance Parameters:
Instance ID : 0 Instance State : Active
LSR ID : 0.0.0.0
Loop Detection : Off
Hop Count Limit : 32 Path Vector Limit : 32
Label Retention Mode: Liberal Label Distribution Control Mode: Ordered
IGP Sync Delay : 0 sec IGP Sync Delay on Restart : -