R211x-HP Flexfabric 11900 MPLS Command Reference

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string

of 1 to 31 characters. The command displays LDP LSP information for the specified VPN. If you do not

specify a VPN instance, the command displays LDP LSP information for the public network.

destination-address mask-length: Specifies an FEC by an IP address and a mask length in the range of 0

to 32. If you do not specify a FEC, the command displays information about LDP LSPs for all FECs.

Examples

# Display LDP LSP information for the public network.

<Sysname> display mpls ldp lsp

Status Flags: * - stale, L - liberal

Statistics:

FECs: 4 Ingress LSPs: 1 Transit LSPs: 1 Egress LSPs: 3

FEC In/Out Label Nexthop OutInterface

1.1.1.1/32 -/3 10.1.1.1 Vlan17

1151/3 10.1.1.1 Vlan20

2.2.2.2/32 3/-

-/1151(L)

10.1.1.0/24 1149/-

-/1149(L)

192.168.1.0/24 1150/-

-/1150(L)

Table 16 Command output

Field Descri

tion

Status Flags

LSP status:

• *—Stale, indicating the LSP is under a GR process.

• L—Liberal, indicating the LSP is not available.

Statistics

LSP statistics:

• FECs—Total number of FECs.

• Ingress LSPs—Number of LSPs that take the local device as the

ingress node.

• Transit LSPs—Number of LSPs that take the local device as a transit

node.

• Egress LSPs—Number of LSPs that take the local device as the egress

node.

FEC Forwarding equivalence class identified by an IP prefix.