R211x-HP Flexfabric 11900 MPLS Command Reference

32
display mpls ldp interface
Use display mpls ldp interface to display LDP interface information.
Syntax
display mpls ldp interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, this command displays information about all LDP interfaces.
Examples
# Display information about all LDP interfaces.
<Sysname> display mpls ldp interface
Interface MPLS LDP Auto-config
Vlan17 Enabled Configured -
Vlan17 Enabled Configured -
Table 15 Command output
Field Descri
p
tion
Interface Interface enabled with LDP.
MPLS Whether the interface is enabled with MPLS.
LDP Whether the interface is configured with the mpls ldp enable command.
Auto-config
LDP automatic configuration information. This field is not supported in the
current software version and is reserved for future support.
Related commands
• mpls ldp
• mpls ldp enable
display mpls ldp lsp
Use display mpls ldp lsp to display information about LSPs generated by LDP.
Syntax
display mpls ldp lsp [ vpn-instance vpn-instance-name ] [ destination-address mask-length ]