R211x-HP Flexfabric 11900 MPLS Command Reference

273
Table 105 Command output
Field Descri
p
tion
PW ID/Rmt Site
This field displays the PW ID for an LDP PW (FEC 128) or a static PW, displays a
hyphen (-) for a BGP auto-discovery LDP PW (FEC 129), and displays the remote site ID
for a BGP PW.
Proto Protocol used to establish the PW: LDP, Static, or BGP.
Flag
PW attribute flag:
• M—Primary PW.
• B—Backup PW.
• H—The PW is the hub link in the VPLS hub-spoke network. This flag is not supported
in the current software version.
• S—The PW is a spoke link in the VPLS hub-spoke network. This flag is not supported
in the current software version.
• N—Split horizon forwarding is disabled.
Link ID Link ID of the PW in the VSI.
State PW state: Up, Down, or Blocked. Blocked indicates that the PW is blocked.
# Display detailed information about all L2VPN PWs.
<Sysname> display l2vpn pw verbose
VSI Name: aaa
Peer: 2.2.2.9 Remote Site: 2
Signaling Protocol : BGP
Link ID : 9 PW State : Up
In Label : 131153 Out Label: 131155
MTU : 1500
PW Attributes : Main
VCCV CC : -
VCCV BFD : -
Tunnel Group ID : 0x1800000760000005
Tunnel NHLFE IDs : 133
Peer: 3.3.3.9 Remote Site: 3
Signaling Protocol : BGP
Link ID : 10 PW State : Up
In Label : 131154 Out Label: 131156
MTU : 1500
PW Attributes : Main
VCCV CC : -
VCCV BFD : -
Tunnel Group ID : 0x1800000860000006
Tunnel NHLFE IDs : 135
VSI Name: bbb
Peer: 2.2.2.9 VPLS ID: 100:100
Signaling Protocol : LDP
Link ID : 8 PW State : Up
In Label : 131158 Out Label: 131159