R211x-HP Flexfabric 11900 MPLS Command Reference

264
Site ID : 2
Offset : 0
RD : 1:1
Range : 10
Label Base : 131153
Link ID : 8,9,10,11,12,13,14,15,16
Table 97 Command output
Field Descri
p
tion
Offset Offset of the label block.
RD RD of the label block. If no RD is configured, this field displays a hyphen (-).
Range Range of the label block.
Label Base Initial value of the label block.
Link ID Link ID of the PW established using the label block.
Related commands
display l2vpn pw
display l2vpn ldp
Use display l2vpn ldp to display LDP PW label information.
Syntax
display l2vpn ldp [ peer ip-address [ pw-id pw-id | vpls-id vpls-id] | vsi vsi-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
peer ip-address: Displays information about PW labels advertised by a peer PE through LDP. The
ip-address argument specifies the LSR ID of the peer PE. If no peer PE is specified, the command displays
information about LDP PW labels advertised by all peer PEs.
pw-id pw-id: Displays FEC 128 LDP PW label information for the PW specified by its PW ID in the range
of 4294967295. If you specify the peer ip-address option without the pw-id pw-id option, the command
displays all LDP PW label information advertised by the specified peer PE.
vpls-id vpls-id: Displays FEC 129 LDP PW label information for the VPLS instance specified by its ID,
which is a string of 3 to 21 characters. You can specify a VPLS ID in one of the following formats:
• 16-bit AS number:32-bit user-defined number, such as 101:3.
• 32-bit IP address:16-bit user-defined number, such as 192.168.122.15:1.