R211x-HP Flexfabric 11900 MPLS Command Reference

262
network-operator
mdc-admin
mdc-operator
Parameters
local: Displays local VPLS label block information from BGP.
peer ip-address: Displays VPLS label block information received from the remote BGP peer.
vsi vsi-name: Displays VPLS label block information for the VSI specified by its name, a case-sensitive
string of 1 to 31 characters. If no VSI is specified, this command displays VPLS label block information for
all VSIs.
verbose: Displays detailed information. Without this keyword, the command displays brief information.
Usage guidelines
If a peer is specified with the peer ip-address option, the command displays both the label block received
from the peer and the local label block that matches the received label block.
The local label block matches the received label block if the following condition is met: local label block
LO ≤ remote site ID ≤ local label block LO + local label block LR – 1.
If neither peer ip-address nor local is specified, the command displays label block information received
from all peers, and the local block information that matches the received label block information.
Examples
# Display brief information about label blocks received from all BGP peers.
<Sysname> display l2vpn bgp
Total number of BGP PWs: 2, 2 up, 0 down
VSI Name: aaa
Rmt Site Offset RD Nexthop In/Out Label State
1 0 1:1 1.1.1.9 131153/131155 Up
3 0 1:1 3.3.3.9 131160/131156 Up
Table 94 Command output
Field Descri
p
tion
Rmt Site ID of the remote site.
Offset Offset of the label block.
# Display detailed information about label blocks received from all BGP peers.
<Sysname> display l2vpn bgp verbose
VSI Name: aaa
Remote Site ID : 1
Offset : 0
RD : 1:1
PW State : Up
Encapsulation : BGP-VPLS
MTU : 1500
Nexthop : 1.1.1.9
Local VC Label : 131153