R211x-HP Flexfabric 11900 MPLS Command Reference

261
display l2vpn auto-discovery
Use display l2vpn auto-discovery to display information about automatically discovered VPLS PEs.
Syntax
display l2vpn auto-discovery [ peer ip-address ] [ vsi vsi-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
peer ip-address: Displays information about the specified VPLS PE. If no PE is specified, this command
displays information about all automatically discovered VPLS PEs.
vsi vsi-name: Displays automatically discovered VPLS PEs for the VSI specified by its name, a
case-sensitive string of 1 to 31 characters. If no VSI is specified, this command displays automatically
discovered VPLS PEs for all VSIs.
Examples
# Display information about all automatically discovered VPLS PEs.
<Sysname> display l2vpn auto-discovery
Total number of automatically discovered peers: 2
VSI Name: bbb
RD PE_address VPLS ID Nexthop
2:2 1.1.1.9 100:100 1.1.1.9
2:2 3.3.3.9 100:100 3.3.3.9
Related commands
• route-distinguisher
• vpls-id
display l2vpn bgp
Use display l2vpn bgp to display VPLS label block information from BGP.
Syntax
display l2vpn bgp [ local | peer ip-address ] [ vsi vsi-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin