R211x-HP Flexfabric 11900 MPLS Command Reference

236
Syntax
revertive { wtr wtr-time | never }
undo revertive { wtr | never }
Default
When the primary PW recovers, traffic is immediately switched from the backup PW to the primary PW.
Views
Cross-connect view
Predefined user roles
network-admin
mdc-admin
Parameters
wtr wtr-time: Specifies the wait time in the range of 0 to 180 seconds. When the primary PW recovers,
the PE waits for the specified time before switching traffic from the backup PW to the primary PW.
never: Disables backup to primary switchover.
Examples
# Specify the switchover wait time as 120 seconds for the cross-connect ac2pw in the cross-connect
group vpn1.
<Sysname> system-view
[Sysname] xconnect-group vpn1
[Sysname-xcg-vpn1] connection ac2pw
[Sysname-xcg-vpn1-ac2pw] revertive wtr 120
Related commands
display l2vpn pw
route-distinguisher
Use route-distinguisher to configure a route distinguisher (RD) for a BGP cross-connect group.
Use undo route-distinguisher to remove the RD.
Syntax
route-distinguisher route-distinguisher
undo route-distinguisher
Default
No RD is configured in auto-discovery cross-connect group view.
Views
Auto-discovery cross-connect group view
Predefined user roles
network-admin
mdc-admin