R211x-HP Flexfabric 11900 MPLS Command Reference

222
service-instance instance-id: Displays information about the service instance specified by its ID in the
range of 1 to 4096. If interface interface-type interface-number is specified without this option, the
command displays information about all service instances on the specified Layer 2 Ethernet interface or
Layer 2 aggregate interface.
verbose: Displays detailed information. Without this keyword, the command displays brief information.
Examples
# Display brief information about all service instances.
<Sysname> display l2vpn service-instance
Total number of service-instances: 5, 5 up, 0 down
Total number of ACs: 4, 4 up, 0 down
Interface SrvID Owner LinkID State Type
XGE1/0/3 1 vpws1 1 Up VPWS
XGE1/0/3 2 vpws2 1 Up VPWS
XGE1/0/3 3 vpws3 1 Up VPWS
XGE1/0/3 4 vpws4 1 Up VPWS
XGE1/0/3 5 Up
Table 81 Command output
Field Descri
p
tion
SrvID Service instance ID.
Owner
Name of the cross-connect group bound to the service instance. If no cross-connect
group is bound, this field is blank.
Type L2VPN type: VPLS or VPWS.
# Display detailed information about all service instances on the Layer 2 Ethernet interface
Ten-GigabitEthernet 1/0/1.
<Sysname> display l2vpn service-instance interface ten-gigabitethernet 1/0/1 verbose
Interface: XGE1/0/1
Service Instance: 1
Encapsulation : s-vid 100
Xconnect-group: vpws1
Connection : actopw
Link ID : 1
State : Up
Service Instance: 2
Encapsulation : s-vid 1001
Xconnect-group: vpws2
Connection : pwtopw
Link ID : 1
State : Up
Service Instance: 3
Encapsulation : s-vid 2000
Xconnect-group: vpws3
AD Connection : Site 1, Remote Site 2
Link ID : 1
State : Up