R211x-HP Flexfabric 11900 MPLS Command Reference

220
Tunnel Group ID : 0x1800000860000006
Tunnel NHLFE IDs : 135
Table 79 Command output
Field Descri
p
tion
Xconnect-group Name Cross-connect group name.
Connection Cross-connect name, which is displayed for LDP and static PWs.
Peer IP address of the peer PE of the PW.
PW State
PW state: Up, Down, or Blocked.
Blocked indicates that the PW is a backup PW.
Wait to Restore Time
Wait time to switch traffic from the backup PW to the primary PW when the
primary PW recovers, in seconds. If the switchover is disabled, this field displays
Infinite.
This field is available when both primary and backup PW exist, and is displayed
only for the primary PW.
Remaining Time Remaining wait time for traffic switchover, in seconds.
PW Attributes
PW attribute:
• Main—Primary PW.
• Backup—Backup PW.
VCCV CC
VCCV CC type. This field is not supported in the current software version and is
reserved for future support.
VCCV BFD
VCCV BFD type. This field is not supported in the current software version and is
reserved for future support.
Tunnel Group ID ID of the tunnel group for the PW.
Tunnel NHLFE IDs
NHLFE IDs of the public tunnels that carry the PW.
If equal-cost tunnels are available, this field displays multiple tunnel NHLFE IDs.
If no tunnel is available, this field displays None.
Connection of
auto-discovery
The PW is a BGP PW.
Site Local site ID.
Remote site Remote site ID.
display l2vpn pw-class
Use display l2vpn pw-class to display PW class information.
Syntax
display l2vpn pw-class [ class-name ]
Views
Any view
Predefined user roles
network-admin