R211x-HP Flexfabric 11900 MPLS Command Reference

210
display bgp update-group l2vpn
Use display bgp update-group l2vpn to display update group information for the BGP L2VPN address
family.
Syntax
display bgp update-group l2vpn [ ip-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
ip-address: Displays update group information for the specified BGP L2VPN peer. If no peer is specified,
the command displays all update group information for the BGP L2VPN address family.
Examples
# Display all update group information for the BGP L2VPN address family.
<Sysname> display bgp update-group l2vpn
Update-group ID: 0
Type: EBGP link
4-byte AS number: Supported
L2VPN signaling (VPLS): Supported
L2VPN signaling (VPWS): RFC mode
Minimum time between advertisements: 15 seconds
OutQ: 0
Members: 1
1.1.1.3
# Display update group information for the BGP L2VPN peer 1.1.1.3.
<Sysname> display bgp update-group l2vpn 1.1.1.3
Update-group ID: 0
Type: IBGP link
4-byte AS number: Supported
L2VPN signaling (VPLS): Supported
L2VPN signaling (VPWS): Draft mode
Minimum time between advertisements: 15 seconds
OutQ: 0
Members: 1
1.1.1.3