R211x-HP Flexfabric 11900 MPLS Command Reference

203
BGP peer group: group1
Remote AS: not specified
Type: external
Members:
10.1.1.1
# Display detailed information about the BGP L2VPN peer group group1.
<Sysname> display bgp group l2vpn group1
BGP peer group: group1
Remote AS: 600
Type: external
Maximum number of prefixes allowed: 4294967295
Threshold: 75%
Configured hold time: 180 seconds
Keepalive time: 60 seconds
Minimum time between advertisements: 30 seconds
Peer preferred value: 0
Routing policy configured:
No routing policy is configured
Members:
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
10.1.1.1 600 0 0 0 0 00:00:05 Idle
Table 62 Command output
Field Descri
p
tion
Type
Type of the peer group:
• external—EBGP peer group.
• internal—IBGP peer group.
Maximum number of
prefixes allowed
This field is ignored in BGP L2VPN.
Threshold This field is ignored in BGP L2VPN.
Peer preferred value This field is ignored in BGP L2VPN.
Routing policy configured This field is ignored in BGP L2VPN.
MsgRcvd Number of messages received from the peer.
MsgSent Number of messages sent to the peer.
OutQ Number of messages to be sent to the peer.
PrefRcv Number of label block messages received from the peer.
display bgp l2vpn signaling
Use display bgp l2vpn signaling to display MPLS L2VPN label block information maintained by BGP.