R211x-HP Flexfabric 11900 MPLS Command Reference

13
network-operator
mdc-admin
mdc-operator
Parameters
nid-value1: Specifies an NID in the range of 0 to 65535. If used with the nid-value2 argument, the
nid-value1 argument represents the start NID of an NID range.
to nid-value2: Specifies the end NID of the NID range. The value range for the end NID is 0 to 65535.
If you specify an NID range by using the nid-value1 argument and the to nid-value2 option, the
command displays usage information for the specified range of NIDs.
Usage guidelines
NIDs are 32-bit binary numbers. They include fixed NIDs and dynamic NIDs.
• Fixed NIDs—Generated for tunnel interfaces. The highest four bits are a value other than 0000.
• Dynamic NIDs—NIDs except fixed NIDs. The highest four bits are 0s.
If you do not specify any parameter, the command displays usage information for all dynamic NIDs.
Examples
# Display usage information for dynamic NIDs 1028 through 1500.
<Sysname> display mpls nid 1028 to 1500
NID alloc state: '.' means not used, '$' means used
1028 :...$.... ........ ........ ........ ........ ........ ........ ........
1092 :........ ........ ........ ........ ........ ........ ........ ........
1156 :........ ........ ........ ........ ........ ........ ........ ........
1220 :........ ........ ........ ........ ........ ........ ........ ........
1284 :........ ........ ........ ........ ........ ........ ........ ........
1348 :........ ........ ........ ........ ........ ........ ........ ........
1412 :........ ........ ........ ........ ........ ........ ........ ........
1476 :........ ........ ........ .
display mpls summary
Use display mpls summary to display MPLS summary information.
Syntax
display mpls summary
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display MPLS summary information.