R211x-HP Flexfabric 11900 MPLS Command Reference

171
Views
VPN instance view
Predefined user roles
network-admin
mdc-admin
Parameters
vpn-id: Specifies a VPN ID for the VPN instance, in the form of OUI:Index. Both OUI and Index are hex
numbers. The OUI is in the range of 0 to FFFFFF, and the index is in the range of 0 to FFFFFFFF.
Usage guidelines
The VPN ID uniquely identifies the VPN instance. Different VPN instances must have different VPN IDs.
The VPN ID cannot be 0:0.
Examples
# Configure VPN ID 20:1 for the VPN instance vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] vpn-id 20:1
Related commands
display ip vpn-instance
vpn-target (VPN instance view/IPv4 VPN view/IPv6 VPN view)
Use vpn-target to configure route targets for a VPN instance.
Use undo vpn-target to remove the specified or all route targets of a VPN instance.
Syntax
vpn-target vpn-target&<1-8> [ both | export-extcommunity | import-extcommunity ]
undo vpn-target { all | vpn-target&<1-8> [ both | export-extcommunity | import-extcommunity ] }
Default
No route targets are configured for a VPN instance.
Views
VPN instance view, IPv4 VPN view, IPv6 VPN view
Predefined user roles
network-admin
mdc-admin
Parameters
vpn-target&<1-8>: Specifies route targets. &<1-8> means that you can specify up to eight route targets.
A route target is a string of 3 to 21 characters in one of these formats:
• 16 - bit AS numbe r :32-bit user-defined number. For example, 101:3.
• 32-bit IP address:16-bit user-defined number. For example, 192.168.122.15:1.