R211x-HP Flexfabric 11900 MPLS Command Reference

119
mdc-admin
Parameters
retrans-timer-value: Specifies the RSVP message retransmission interval in the range of 500 to 3000
milliseconds.
Usage guidelines
After the reliable RSVP message delivery function is enabled by using the rsvp reduction srefresh
reliability command, the retransmission increment and retransmission interval together determine the
time for the next transmission of the RSVP message. For more information, see the usage guidelines in
the rsvp reduction srefresh command
.
Examples
# On interface VLAN-interface 10, configure the RSVP message retransmission interval as 1000
milliseconds.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rsvp reduction retransmit interval 1000
Related commands
• rsvp reduction retransmit increment
• rsvp reduction srefresh
rsvp reduction srefresh
Use rsvp reduction srefresh to enable summary refresh and reliable RSVP message delivery.
Use undo rsvp reduction srefresh to disable summary refresh and reliable RSVP message delivery.
Syntax
rsvp reduction srefresh [ reliability ]
undo rsvp reduction srefresh
Default
Summary refresh and reliable RSVP message delivery are disabled.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
reliability: Enables reliable RSVP message delivery. If you do not specify this keyword, this command
enables only the summary refresh function.
Usage guidelines
RSVP sends Path and Resv messages with the same states and objects to maintain the path and
reservation states at a specific interval (configured by the refresh interval command). These messages
are collectively referred to as refresh messages. Refresh messages are used to synchronize the path and
reservation states on RSVP neighbors and to recover from lost RSVP messages.