R211x-HP Flexfabric 11900 MPLS Command Reference

94
Table 33 Command output
Field Descri
p
tion
Destination Tunnel destination address.
Source Tunnel source address.
Style
Resource reservation style:
• SE—Shared-explicit style.
• FF—Fixed-filter style.
# Display detailed information about the RSVP resource reservation requests sent to all upstream devices.
<Sysname> display rsvp request verbose
Destination: 3.3.3.9 Source: 1.1.1.9
Tunnel ID: 1 Style: SE
Previous hop: 57.10.10.1 Previous hop LIH: 0xf0008
Send message epoch: 0 Send message ID: 0
Out-Interface: Vlan10 Refresh interval: 30000 ms
Unknown object number: 0
Flow descriptor 1:
Flow specification:
Average bitrate: 50.00 kbps Maximum burst: 1000.00 bytes
Path MTU: 1500 QoS service: Controlled-Load
Filter specification 1:
Sender address: 1.1.1.9 LSP ID: 23
Label: 1110
Table 34 Command output
Field Descri
p
tion
Destination Tunnel destination address.
Source Tunnel source address.
Style
Resource reservation style:
• SE—Shared-explicit style.
• FF—Fixed-filter style.
Previous hop LIH Logical interface handle of the previous hop.
Send message epoch Value of the Epoch field in the Message ID object of the sent message.
Send message ID Message ID in the sent message.
Out-Interface Outgoing interface of the message.
Refresh interval Refresh interval for Path and Resv messages, in milliseconds.
Unknown object number Number of unknown objects.
QoS service QoS service type: Controlled-Load or Guaranteed.
Sender address Sender address identifies the tunnel source end.
Label Incoming label of the forward LSP.