R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

65
Views
DHCP address pool view
Predefined user roles
network-admin
mdc-admin
Parameters
ip-address: Specifies the IP address of a TFTP server.
Usage guidelines
If you use this command multiple times, the most recent configuration takes effect.
Examples
# Specify the TFTP server address 10.1.1.1 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] tftp-server ip-address 10.1.1.1
Related commands
• display dhcp server pool
• tftp-server domain-name
voice-config
Use voice-config to configure the content for Option 184 in a DHCP address pool.
Use undo voice-config to remove the Option 184 content from a DHCP address pool.
Syntax
voice-config { as-ip ip-address | fail-over ip-address dialer-string | ncp-ip ip-address | voice-vlan vlan-id
{ disable | enable } }
undo voice-config [ as-ip | fail-over | ncp-ip | voice-vlan ]
Default
No Option 184 content is configured in a DHCP address pool.
Views
DHCP address pool view
Predefined user roles
network-admin
mdc-admin
Parameters
as-ip ip-address: Specifies the IP address of the backup network calling processor.
fail-over ip-address dialer-string: Specifies the failover IP address and dialer string. The dialer-string is a
string of 1 to 39 characters, which can include numbers 0 through 9 and asterisk (*).
ncp-ip ip-address: Specifies the IP address of the primary network calling processor.
voice-vlan vlan-id: Specifies the voice VLAN ID in the range of 2 to 4094.