R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

35
Use undo dhcp class to remove the specified user class.
Syntax
dhcp class class-name
undo dhcp class class-name
Default
No DHCP user class exists.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
class-name: Specifies the name of a DHCP user class, a case-insensitive string of 1 to 63 characters.
Usage guidelines
In the DHCP user class view, use the if-match option command to configure a match rule to match specific
clients. Then use the class command to specify an IP address range for the matching clients.
Examples
# Create a DHCP user class test and enter DHCP user class view.
<Sysname> system-view
[Sysname] dhcp class test
[Sysname-dhcp-class-test]
Related commands
• address range
• class
• if-match option
dhcp server always-broadcast
Use dhcp server always-broadcast to enable the DHCP server to broadcast all responses.
Use undo dhcp server always-broadcast to restore the default.
Syntax
dhcp server always-broadcast
undo dhcp server always-broadcast
Default
The DHCP server reads the broadcast flag in a DHCP request to decide whether to broadcast or unicast
the response.
Views
System view