R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

21
network-operator
mdc-admin
mdc-operator
Parameters
vlan vlan-id: Displays ARP snooping entries for a specific VLAN. The vlan-id argument is in the range of
1 to 4094.
count: Displays the number of the current ARP snooping entries.
ip ip-address: Displays the ARP snooping entry for the specified IP address.
slot slot-number: Specifies a card by its slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on the specified IRF member device. The
chassis-number argument specifies the member device ID in the IRF fabric. The slot-number argument
specifies the slot number of the card. (In IRF mode.)
Usage guidelines
If you do not specify any keywords or arguments, the command displays all ARP snooping entries.
Examples
# Display ARP snooping entries for VLAN 2.
<Sysname> display arp snooping vlan 2
IP Address MAC Address VLAN ID Interface Aging Status
3.3.3.3 0003-0003-0003 2 XGE1/0/1 20 Valid
3.3.3.4 0004-0004-0004 2 XGE1/0/2 5 Invalid
# Display the number of the current ARP snooping entries.
<Sysname> display arp snooping count
Total entries: 2
Table 2 Command output
Field Description
IP Address IP address in an ARP snooping entry.
MAC Address MAC address in an ARP snooping entry.
VLAN ID ID of the VLAN to which the ARP snooping entry belongs.
Interface Input interface in an ARP snooping entry.
Aging
Aging time for an ARP snooping entry in minutes. If the card learns an ARP
snooping entry from another card, the card cannot learn the aging time of the
entry, and this field displays N/A.
Status Status of an ARP snooping entry: Valid, Invalid, Collision.
Total entries Number of ARP snooping entries.
reset arp snooping
Use reset arp snooping to remove ARP snooping entries.