R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

289
Examples
# Clear the statistics for the interface Tunnel 1.
<Sysname> reset counters interface tunnel 3
Related commands
display interface tunnel
service
Use service to specify a service card for forwarding the traffic on the tunnel interface.
Use undo service to restore the default.
Syntax
In standalone mode:
service slot slot-number
undo service slot
In IRF mode:
service chassis chassis-number slot slot-number
undo service chassis
Default
No service card is specified for the tunnel interface.
Views
Tunnel interface view
Predefined user roles
network-admin
mdc-admin
Parameters
slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds
the card. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card of an IRF member device. The chassis-number
argument represents the ID of the IRF member device. The slot-number argument represents the number
of the slot that holds the card. (In IRF mode.)
Usage guidelines
If no service card is specified for forwarding the traffic on the tunnel interface, the traffic is processed on
the card that receives the traffic.
Some functions, such as IPsec anti-replay, require that traffic for the same tunnel interface be processed
on the same card. If such a function is configured, you must use this command to specify a service card
for forwarding the traffic on a tunnel interface.
If the specified service card is removed, traffic on the tunnel interface cannot be forwarded even if the
tunnel interface is up. When the service card is reinstalled, traffic forwarding resumes on the card.