R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

278
Syntax
reset ipv6 dhcp snooping binding { all | address ipv6-address [ vlan vlan-id ] }
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
address ipv6-address: Clears the DHCPv6 snooping entry for the specified IPv6 address.
vlan vlan-id: Clears DHCPv6 snooping entries for the specified VLAN.
all: Clears all DHCPv6 snooping entries.
Usage guidelines
This command applies to all slots.
Examples
# Clear all DHCPv6 snooping entries.
<Sysname> reset ipv6 dhcp snooping binding all
Related commands
display ipv6 dhcp snooping binding
reset ipv6 dhcp snooping packet statistics
Use reset ipv6 dhcp snooping packet statistics to clear DHCPv6 packet statistics for DHCPv6 snooping.
Syntax
In standalone mode:
reset ipv6 dhcp snooping packet statistics [ slot slot-number ]
In IRF mode:
reset ipv6 dhcp snooping packet statistics [ chassis chassis-number slot slot-number ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
slot slot-number: Specifies the slot number of a card. If you do not specify any slot number, this command
clears DHCPv6 packet statistics for the card where the command is executed. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card in an IRF member device. The chassis-number
argument represents the IRF member ID of the device, and the slot-number argument represents the slot
number of the card on the device. If you do not specify any IRF member device or slot number, this