R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

264
Examples
# Enable the DHCPv6 relay agent on VLAN-interface 2 and specify the DHCPv6 server address
2 0 01:1: : 3.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] ipv6 dhcp select relay
[Sysname-Vlan-interface2] ipv6 dhcp relay server-address 2001:1::3
Related commands
• display ipv6 dhcp relay server-address
• ipv6 dhcp select
reset ipv6 dhcp relay statistics
Use reset ipv6 dhcp relay statistics to clear packets statistics on the DHCPv6 relay agent.
Syntax
reset ipv6 dhcp relay statistics [ interface interface-type interface-number ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify any interface, the command clears all relay agent statistics.
Examples
# Clear packet statistics on the DHCPv6 relay agent.
<Sysname> reset ipv6 dhcp relay statistics
Related commands
display ipv6 dhcp relay statistics
DHCPv6 snooping commands
DHCPv6 snooping works between the DHCPv6 client and the DHCPv6 server or between the DHCPv6
client and DHCPv6 the relay agent. DHCPv6 snooping does not work between the DHCPv6 server and
the DHCPv6 relay agent.
display ipv6 dhcp snooping binding
Use display ipv6 dhcp snooping binding to display DHCPv6 snooping entries.
Syntax
display ipv6 dhcp snooping binding [ address ipv6-address [ vlan vlan-id ] ]