R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

172
Syntax
udp-helper server ip-address
undo udp-helper server [ ip-address ]
Default
No destination server is specified.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
ip-address: Specifies the IP address of a destination server, in dotted decimal notation.
Usage guidelines
Specify destination servers on an interface that receives UDP broadcast packets. You can specify up to
20 destination servers on an interface.
If you do not specify the ip-address argument, the undo udp-helper server command removes all
destination servers on the interface.
Examples
# Specify the destination server 192.1.1.2 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] udp-helper server 192.1.1.2
Related commands
display udp-helper interface