R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

159
undo ip icmp source [ vpn-instance vpn-instance-name ]
Default
The device uses the IP address of the sending interface as the source IP address for outgoing ICMP
packets.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
vpn-instance vpn-instance-name: Specifies the VPN instance to which the specified address belongs. The
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. The specified VPN instance
must exist. If the specified IP address is on the public network, do not use this option.
ip-address: Specifies an IP address.
Usage guidelines
It is a good practice to specify the IP address of the loopback interface as the source IP address for
outgoing ping echo request and ICMP error messages. This feature helps users to locate the sending
device easily.
Examples
# Specify 1.1.1.1 as the source address for outgoing ICMP packets.
<Sysname> system-view
[Sysname] ip icmp source 1.1.1.1
ip mtu
Use ip mtu to configure an MTU for an interface.
Use undo ip mtu to restore the default.
Syntax
ip mtu mtu-size
undo ip mtu
Default
No MTU is configured for an interface.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
mtu-size: Specifies an MTU in the range of 128 to 2000 bytes.