R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

118
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
host-name: Specifies a host name, a case-insensitive string of 1 to 253 characters. It can include letters,
digits, hyphens (-), underscores (_), and dots (.).
ip-address: Specifies the IPv4 address of the host.
vpn-instance vpn-instance-name: Specifies the name of an MPLS L3VPN instance, a case-sensitive string
of 1 to 31 characters. To specify a host name-to-IP address mapping on the public network, do not
specify this option.
Usage guidelines
You can configure host name-to-IPv4 address mappings for the public network and up to 1024 VPNs,
and configure a maximum of 1024 host name-to-IPv4 address mappings for the public network or each
VPN.
On the public network or a VPN, each host name maps to only one IPv4 address. If you use the
command multiple times, the most recent configuration takes effect.
Exclude the ping command parameters ip, -a, -c, -f, -h, -i, -m, -n, -p, -q, -r, -s, -t, -tos, -v, and
-vpn-instance from the host name. For more information about the ping command parameters, see
Network Management and Monitoring.
Examples
# Map the IPv4 address 10.110.0.1 to the host name aaa on the public network.
<Sysname> system-view
[Sysname] ip host aaa 10.110.0.1
Related commands
display dns host
ipv6 dns dscp
Use ipv6 dns dscp to set the DSCP value for IPv6 DNS packets sent by an IPv6 DNS client or DNS proxy.
Use undo ipv6 dns dscp to restore the default.
Syntax
ipv6 dns dscp dscp-value
undo ipv6 dns dscp
Default
The DSCP value for IPv6 DNS packets is 0.
Views
System view