R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

112
<Sysname> display ipv6 dns server
Type:
D: Dynamic S: Static
No. Type IPv6 address Outgoing Interface
1 S 2::2
Table 25 Command output
Field Descri
p
tion
No. Sequence number.
Type
DNS server type:
• S—A manually configured DNS server.
• D—DNS server information dynamically obtained through DHCP or other
protocols.
IPv6 address IPv6 address of the DNS server.
Outgoing Interface Output interface.
Related commands
ipv6 dns server
dns dscp
Use dns dscp to set the DSCP value for DNS packets sent by a DNS client or DNS proxy.
Use undo dns dscp to restore the default.
Syntax
dns dscp dscp-value
undo dns dscp
Default
The DSCP value in DNS packets is 0.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
dscp-value: Sets the DSCP value for outgoing DNS packets, in the range of 0 to 63.
Usage guidelines
The DSCP value of a packet specifies the priority level of the packet and affects the transmission priority
of the packet. A bigger DSCP value represents a higher priority.
Examples
# Set the DSCP value for outgoing DNS packets to 30.