R211x-HP Flexfabric 11900 Layer 3 - IP Services Command Reference

3
Examples
# Specify VLAN-interface 40 to learn up to 500 dynamic ARP entries.
<Sysname> system-view
[Sysname] interface vlan-interface 40
[Sysname-Vlan-interface40] arp max-learning-num 500
# Specify Ten-GigabitEthernet 1/0/1 to learn up to 1000 dynamic ARP entries.
<Sysname> system-view
[Sysname] interface Ten-GigabitEthernet1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] arp max-learning-num 1000
# Specify Layer 2 aggregate interface bridge-aggregation 1 to learn up to 1000 dynamic ARP entries.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] arp max-learning-num 1000
arp max-learning-number
Use arp max-learning-number to set the maximum number of dynamic ARP entries that a device can
learn.
Use undo arp max-learning-number to restore the default.
Syntax
In standalone mode:
arp max-learning-number number slot slot-number
undo arp max-learning-number slot slot-number
In IRF mode:
arp max-learning-number number chassis chassis-number slot slot-number
undo arp max-learning-number chassis chassis-number slot slot-number
Default
A device can learn a maximum of 16384 dynamic ARP entries.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
Number: Specifies the maximum number of dynamic ARP entries for a device. The value range is 0 to
1638 4.
slot slot-number: Specifies the maximum number of dynamic ARP entries for the interface card specified
by the slot number. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies the maximum number of dynamic ARP entries for a
card on an IRF member device. The chassis-number argument specifies the ID of the IRF member device.
The slot-number argument specifies the slot number of the card. (In IRF mode.)