R211x-HP Flexfabric 11900 Fundamentals Configuration Guide

23
Ste
p
Command Remarks
3. Disable
authentication.
authentication-mode none
By default, authentication is disabled for the
AUX line.
4. Assign a user
role.
user-role role-name
By default, an AUX line user of the default
MDC is assigned the user role
network-admin, and Non-default MDCs do
not support console or AUX login.
The next time you attempt to log in through the console port, you do not need to provide any username
or password.
Configuring password authentication for console login
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter AUX line view or
class view.
• To enter AUX line view:
line aux first-number
[ last-number ]
• To enter AUX line class view:
line class aux
Use either command.
A setting in user line view is applied
only to the user line. A setting in user
line class view is applied to all user
lines of the class.
A non-default setting in either view
takes precedence over a default
setting in the other view. A
non-default setting in user line view
takes precedence over a non-default
setting in user line class view.
A setting in user line view takes effect
immediately and affects the online
user. A setting in user line class view
does not affect online users and takes
effect only for users who log in after
the configuration is completed.
3. Enable password
authentication.
authentication-mode password
By default, authentication is disabled
for the AUX line.
4. Set a password.
set authentication password { hash |
simple } password
By default, no password is set.
5. Assign a user role.
user-role role-name
By default, an AUX line user of the
default MDC is assigned the user role
network-admin, and Non-default
MDCs do not support console or AUX
login.
The next time you attempt to log in through the console port, you must provide the configured login
password.