R211x-HP Flexfabric 11900 Fundamentals Configuration Guide

188

MDC configuration example

Network requirements

Configure three MDCs on the switch shown in Figure 50 to meet the Internet access requirements of three

departments. Assign disk space, memory space, and CPU resources to the departments as required.

Figure 50 Network diagram

Configuration procedure

1. Create and configure MDCA for Department A:

# Create MDCA.

<Device> system-view

[Device] mdc MDCA

Executing this command will create MDC MDCA ID 2 and empty folder /mdc/mdc2 in the

root directory of the storage media. Continue? [Y/N]:y

This MDC was created successfully

# Reclaim the interface card in slot 2 from the default MDC and assign it to MDCA.

[Device-mdc-2-MDCA] mdc Admin

[Device-mdc-1-Admin] undo location slot 2

The configuration associated with the specified slot of MDC will be lost. Continue?

[Y/N]:y

[Device-mdc-1-Admin] mdc MDCA

Device

Internet

MDC B

Server

MDC CMDC A

ServerServer

Switch A

Department A Department B Department C