HP Software File Migration Agent Installation and Administration Guide (September 2009)
Error Codes and Messages | 155
0x00010201 Stub file is not
empty.
Error: A stub file contained
data.This occurs during recall
or a deliberate verify operation
and file is offline but contains
data.
The file may need to be
restored from the disaster
recovery archive. Investigate
third party applications that
might modify stub file
contents.
0x00010203 Metadata
incomplete.
Warning: The file generation
information of the metadata
could not be read. This occurs
during a release, recall, or
deliberate verify operation on a
managed file.
The file is damaged and may
need to be recovered from the
disaster recovery archive.
Contact HP Support.
0x00010204 Stubfile is
modified.
Warning: A stub file's
generation file size does not
match the OS file size of the
stub. This occurs during a
release, recall, or deliberate
verify operation on a managed
file.
See verify on page 114 and
error code 0x00010164.
Consider use of “--repair”
parameter to resolve the issue.
0x00010207 Offline attribute
missing.
Informational: The offline
attribute is clear but the FMA
metadata indicates that the file
is offline. The offline attribute
can be easily and accidentally
toggled by many third party
applications. This occurs
during a release, recall, or
deliberate verify operation on a
managed file.
See the verify command.
Consider use of “--repair”
parameter to resolve the issue.
0x00010208 Offline attribute
invalid.
Informational: The offline
attribute is set but the FMA
metadata indicates that the file
is online. The offline attribute
can be easily and accidentally
toggled by many third party
applications. This occurs
during a release, recall, or
deliberate verify operation on a
managed file.
See the verify command on
page 114. Consider use of “--
repair” parameter to resolve
the issue.
0x00010301 HsmSvc subsystem
is not available
Error: Internal FMA
component communications
was not functioning correctly.
This can occur during normal
operations.
Attempt to restart all FMA
services or reboot the server. If
the error persists, contact HP
Support.
Error Code Error Text Description Recommended Action