HP Software File Migration Agent Installation and Administration Guide (September 2009)

172 | Error Codes and Messages
0x00090008 Error accessing
registry
Error: The FMA filter driver
components can not access the
system registry when a volume
was added or removed from
FMA management.
Restart the system or try to
remove and add the volume to
FMA management again. If the
problem persists, contact HP
Support.
0x00090009 Error accessing
attributes.
Error: A file system filter
component can not access a
file's attributes because the
file's offline attribute was
changed when the file was
released or recalled.
Normally, the file is set to the
state it was in prior to the
operationally a file's offline
attribute ends up in the wrong
state, the “fmacli verify --
repair” command can fix it. If
this occurs frequently, contact
HP Support.
0x0009000A Error accessing
Reparse Point.
Error: A reparse point is a tag
that notifies the file system that
the file contents cannot be
accessed until another process
is called first. This error
indicates that the reparse point
can not be read because a file's
offline attribute is managed or
other file information was
queried.
Retry the operation. If the
problem persists, contact HP
Support.
0x0009000B Error setting sparse
file.
Error: When FMA creates a
stub file, its contents are
converted to a zero filled
sparse file. This error indicates
that this process has failed
while setting the file offline
after a release.
Normally, the file is set to the
state it was in prior to the
operation. Retry the operation.
If the problem persists, contact
HP Support.
0x0009000C Error writing zeros Error: When FMA creates a
stub file, its contents are
converted to a zero filled
sparse file. This error indicates
that part of this process has
failed while setting the file
offline after a release.
Normally, the file is set to the
state it was in prior to the
operation. Retry the operation.
If the problem persists, contact
HP Support.
0x0009000D No connection
with filter
Error: The connection to the
file system filter driver was
lost during an FMA file
management operation.
Restart the system or try to
remove and add the volume to
FMA management again. If the
problem persists, contact HP
Support.
Error Code Error Text Description Recommended Action