HP Software File Migration Agent Installation and Administration Guide (September 2009)

154 | Error Codes and Messages
0x00010135 Unable to activate
file, duplicate
metadata
Error: A file cannot be
activated because another file
already has a valid reference to
the requested archive object.
This error occurs if a stub file
is restored to an alternate
location and the original file
still exists. This error can also
occur if a file is deleted and it
goes to the recycle bin. This
occurs during automatic file
activation, backup restore, or
manually using the fmacli
activate command.
Restore the stub-file to the
original location using the
overwrite option. Or, delete the
file from the recycle bin.
0x00010160 Stub file is not
empty, recall
cancelled.
During recall, a non-empty
stub file was found. This
occurs at the start of a file
recall.
Notify HP Support. The file
may need to be restored from a
disaster recovery backup.
0x00010164 File was not
completely
recalled from
archive.
Error: File was not completely
recalled from archive.
Verify that the connection to
the archive is stable and that
the size of the stub file matches
the size in the archive. The
original file size at the time of
migration is also available in
the FMA metadata.
0x00010171 Maximum of
parallel HSM
operations is
reached
Warning: The maximum
number of concurrent HSM
operations is reached. Storage
to process this request is not
available. This occurs when a
user tries to migrate, recall,
release, erase, and so on.
Try the operation again after
current operations are
complete.
0x00010190 Verify created
informational
message
Informational: The fmacli
verify command was
successful.
None.
0x00010192 Verify created error
message
Error: The file reference entry
for the current file generation
can not be validated with the
archive copy. This occurs
during file activation, release,
or recall.
Consult other log entries for
more details.
Error Code Error Text Description Recommended Action