HP Software File Migration Agent Installation and Administration Guide (September 2009)

Error Codes and Messages | 167
0x00060102 Verification failed
(file size)
Error: During fmacli verify or
activate commands, some
portions of the operation are
RSA specific. This error
occurs if the managed file has
a different size from the copy
in the archive.
If the managed file is currently
a stub file, it must be repaired
using the fmacli verify
command. If it is not a stub
file, analyze why the file sizes
are different and whether the
local copy or archive copy is
the correct file.
0x00060103 Verification failed
(file does not exist)
Error: The file does not exist in
the archive. This occurs during
a recall or verify operation.
Check for file existence in the
archive. If the local file is a
stub file and the archive copy
is missing, it must be restored
from a disaster recovery
backup. If the local file is not a
stub file, it can be remigrated
after erasing the metadata.
0x00060121 Stream format
error
Error: An unlikely internal
error occurred relating to the
data stream type during an
archive write operation.
If this issue is seen frequently,
contact HP Support.
0x00060123 Stream write failed Error: The number of bytes
written to the archive does not
match the expected bytes to
write. This can occur during a
file migration to an archive.
Retry the operation. If the error
persists, contact HP Support.
0x00060124 Unknown storage
descriptor
Warning: A file to be removed
from the archive can not be
found in the archive. This can
occur during the fmacli
cleanup operation.
None.
0x00060125 Remote storage
adapter does not
match with
metadata
Error: During an fmacli
activate or verify operation, it
was determined that the local
copy of the metadata
references an RSA type that is
different from the RSA being
addressed.
This should not occur unless
RSA configurations were
changed without using the
FMA configuration UI or the
file was restored from a
different managed volume
from another server. FMA does
not support restoring files to an
alternate location.
0x00060126 The archive status
file is corrupt
Error: The system attempted to
check the archive status but the
archive status file is corrupted.
Check archive settings or
restart FMA.
Error Code Error Text Description Recommended Action