HP Software File Migration Agent Installation and Administration Guide (September 2009)

Error Codes and Messages | 161
0x00020007 Archive pool is
empty
Warning: Activate archive
error occurred. This occurs
when system tries to activate
the next archive in a sequence
but the archive pool is empty.
None.
0x00020008 Unable to write to
registry
Error: FMA could not write to
the Windows registry.
Examine the log to find the
reason of an error.
0x0002000A Maximum number
of archives
reached.
Error: Maximum number of
archives reached when a user
tries to create an archive.
Delete the unneeded
archive(s).
0x0002000B Archive name is
invalid
Error: Archive name specified
during creation was invalid.
Check the archive name for the
invalid character(s). See
Archives on page 25.
0x0002000D Error contacting
the configuration
server service.
Error: FMA uses a
configuration service to
perform archive configuration
operations such as create or
delete archives. This error
occurs when communication
with this service is not
successful. The service may be
stopped.
Check the FMA configuration
service status. If it is stopped,
restart service or reboot the
server. In a cluster
environment, the configuration
service is active on only one
node. Contact HP Support if
the problem persists.
0x00030002 Maximum number
of volumes
exceeded
Error: FMA can only see a
maximum of 128 volumes.
This occurs if a server has
more than 128 volumes
attached.
Any volumes beyond this point
cannot be seen by FMA and
cannot be managed. Remove
some or move some to another
server.
0x00030003 Volume not a fixed
disk
Error: The volume was not
recognized as a fixed disk.
FMA can only manage fixed
disk volumes. This occurs
when FMA starts up and scans
all attached volumes.
If you believe the volume is
type “fixed disk”, it can be
corrupt and cannot be
recognized as a fixed disk. Run
Windows check disk on it.
0x00030004 No message
displayed
Error: A request to open the
volume returned an invalid
response. This occurs when the
user tries to unmount a volume
and the volume can not be
opened.
Restart FMA services or
reboot the server. Contact HP
Support if the problem persists.
Error Code Error Text Description Recommended Action