FibrChanl-02 (fclp) B.11.31.1311 Fibre Channel Mass Storage Driver for HP-UX 11i v3 Release Notes

EFI version : "ZU6.00A5"

Card revision

Although EDC is the primary way to identify changes in recipe for Integrity systems, it is also

possible to use the card “Rev”, which is printed on a label on the box containing the card, and

on a label on the card.

CAUTION: There are at least three different “Rev” identifiers on the card. The correct one to use

is printed on the SKU label — Integrity-supported versions have a “REV” of 0C or later.

Firmware and EFI

HP Integrity blades require this minimum firmware and EFI:

• Firmware: 2.72a2

• EFI: 4.00a1 (contained in Universal Boot Code 6.00a5)

Look for EFI version ZU6.00A5 or later in the fcmsutil output.

Related information

The latest documentation for the FibrChanl-02 (fclp) Fibre Channel Mass Storage Driver for HP-UX

11i v3 is available at http://www.hp.com/go/hpux-iocards-docs, by clicking onHP Fibre Channel

Host Bus Adapters. Available documents include:

• Support Guide: includes an adapter overview, installation details, adapter configuration,

troubleshooting and maintenance information, additional features, and regulatory information.

• Installation Guide: includes software and hardware installation information for specific HBAs.