Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

392 Fabric OS Message Reference
53-1002149-01
FW-3010
45
Recommended
Action
No action is required. You are informed that PF bit is reset.
Severity INFO
FW-3010
Message <timestamp>, [FW-3010], <sequence-number>,, INFO, <system-name>, <Port
Name>,<Label> value has changed(High=<High value>, Low=<Low value>). Current
value is <Value> <Unit>.
Probable Cause Indicates that the circuit utilization has changed.
Recommended
Action
Respond to this message as it is appropriate to the particular policy of the end-user installation.
Severity INFO
FW-3011
Message <timestamp>, [FW-3011], <sequence-number>,, INFO, <system-name>, <Port
Name>,<Label> is below low boundary(High=<High value>, Low=<Low value>). Current
value is <Value> <Unit>.
Probable Cause Indicates that the circuit utilization is below threshold.
Recommended
Action
No action is required.
Severity INFO
FW-3012
Message <timestamp>, [FW-3012], <sequence-number>,, WARNING, <system-name>, <Port
Name>,<Label> is above high boundary(High=<High value>, Low=<Low value>). Current
value is <Value> <Unit>.
Probable Cause Indicates that the circuit utilization is above threshold.
Recommended
Action
No action is required.
Severity WARNING
FW-3013
Message <timestamp>, [FW-3013], <sequence-number>,, INFO, <system-name>, <Port
Name>,<Label> is below low boundary(High=<High value>, Low=<Low value>). Current
value is <Value> <Unit>